Accessibility Tools
Perfect for an outdoor kitchen or patio bar, the Whynter BOR-326FS Outdoor/Indoor Stainless Steel Refrigerator is equally suited for indoor entertainment spaces, offering versatile placement for any setting.
This unit is designed to perform reliably across a wide range of ambient conditions. Its full stainless steel exterior delivers a sleek, high-end look while enhancing temperature stability.
Featuring a front-venting design for built-in or freestanding installation, reversible door hinges, and adjustable shelving, it easily accommodates cans, bottles, and food items. ENERGY STAR® rated for superior energy efficiency.
This outdoor refrigerator is also ETL-S® sanitation certified, meeting hygiene standards for safe use in food and beverage environments.
| Color | Stainless Steel |
|---|---|
| Installation | Built-in / Freestanding |
| Unit Capacity | 3.0 cu. ft. |
| Temperature Range | 34ºF-54ºF / 1ºC-12ºC |
| Interior Light | Yes |
| Reversible Door | Yes |
| Door Lock with Keys | No |
| Max Power Consumption (AC) | 85W / 0.9 Amps |
| Unit Dimensions | 32.5” H x 14.75” W x 22.5” D (Add 2" in depth with handle installed) |
● Capacity: 128 standard 12 oz. cans
● Storage Capacity: 3.0 cu. ft.
● ENERGY STAR Certified
● ETL-S® Sanitation Certified
● Full Stainless steel body
● Built-In Installation / Freestanding
● Indoor / Outdoor use
● Temperature range: 34°F to 54°F
● Soft interior lighting
● Powerful fan-circulated compressor cooling
● 4 wire shelves
● Reversible door swing
● Voltage: 115V /60Hz
● Power: 85W / 0.9 Amps
● Noise Level: 38 dBA
● ETL Certified
● Product dimensions: 32.5” H x 14.75” W x 22.5” D
● Package dimensions: 26″ D x 17″ W x 35″ H
● Net weight: 65 lbs
● Gross weight: 79 lbs
● UPC 852749006023
*This unit has a one-year limited warranty.
Built-in models are designed to slide under counters and vent from the front, making them perfect for tight spaces. Freestanding models can go anywhere with proper ventilation around the sides and back.
Yes. Built-in units can operate freestanding, but make sure there’s enough room around the back and sides for airflow to prevent overheating.
No. Freestanding units vent heat from the rear, so enclosing them can trap heat and reduce efficiency or damage the fridge.
Capacity is based on standard 12 oz cans. Storing larger bottles may reduce the total number of beverages that fit.
Yes, but some shelves may need to be removed or adjusted to accommodate bottles, craft beer, or specialty beverages.
Built-in beverage fridges only need clearance at the front for ventilation. Freestanding units require at least 4 to 6″ of space at the back and sides so the compressor can operate efficiently. See the installation manual.
Yes. Shelves can be removed or repositioned to fit taller cans, bottles, or different types of beverages.
Most units are set between 36°F and 50°F. Adjust based on whether you’re storing soda, water, beer, or other beverages. Avoid frequent temperature changes for best results.
They operate quietly. You may hear a low hum when the compressor cycles on, but it should not be disruptive.
Most units reach the set temperature within a few hours. Cooling time depends on ambient temperature, door openings, and how full the fridge is.
Many models come with a reversible door, but check your specific model’s guide to confirm.
A small amount of moisture is normal, especially in humid environments. If condensation is excessive, check that the door is closing properly and the fridge isn’t overcrowded.
